Transit Custom V362 (2013+) & Transit V363 (2013+) Drivers seat swivel (RIB)
Fits between the sliders and original seat base. The rear external corners of the slider rails can be cut to avoid any damage to the plastic door trim while rotating the seat if necessary.
Requires handbrake modification (included) and you will need to remove the van battery from under the seat and relocate it elsewhere.
We have been notified that the seat must be raised up using the height adjustment lever before rotating so that the plastic trims on the seat clear the seat base.
For your customers’ future reference, here are some notes on the process, as it’s a one hell of a job!
The handbrake mod bracket can be fitted, but some of the original bolts are welded in place, so need to be cut and drilled out. The metal bracket on the floor that the handbrake gaiter fits onto must also be removed, but the handbrake cable goes through it so the bracket has to be cut out or the brake cable detached. Fixing the new bracket is tricky, as original battery wiring inside the seat base makes access very difficul