T4 Double seat swivel
(European Left hand drive model)
The swivel mechanism is very different to normal single swivels. It uses a cunning slide and swivel approach so you will need to open the side door to allow the full range of movement. The seat is held securely in position while driving by 4 x specially engineered locking bolts.
The T4 double seat swivel is only compatible with original T4 double passenger seats.
It is also compatible with the RIB single front drivers seat swivel to enable all the front row seats to rotate. This will only work if the driver's seat can rotate fully to face the rear, so if you have any furniture behind driver's seat then this set up won't work.
Our T4 double seat swivel has passed seat belt anchorage safety tests conducted by STATUS (The Specialist Testing Facility at Manchester Met Uni) using a pull test on a specialist test rig to EC Directive 76/115/EEC as amended by 2005/41/EEC.
- Rear floor height: Clearance for floors up to 20mm thick.
- Height increase of front seat: 40mm at front.
- All nuts and bolts supplied.
- Total weight: 19Kg.
Delivery EuropeEuropean delivery by GLS or DPD depending on size and weight. Delivery in 5-7 days. Cost will be calculated at checkout
Delivery UKUK mainland delivery is sent by standard courier (3-4 days) or express service (1-2 days). Delivery times may be longer for Northern Ireland, Highland & Islands, and rural postcodes. Note: Express 24 is not a guaranteed service. Free for orders over £69
Delivery InternationalInternational delivery not available.
T4 Double seat swivel (European Left hand drive model)
|Safety Standard: STATUS bench-tested to EC Reg number 12341234|
|Kit Includes: Fixings, Installation guide with photos|
Box dims: 46.5cm (W) x 12.5cm (H) x 15.5cm (L)
|Compatible With: VW Transporter T4 (Left hand drive only)|