RIB Driver swivel. Sprinter / Crafter
Manufactured in France by Scopema, the RIB swivel plate for campervans gets lots of praise on the various forums. In our own experience we have found these seat swivels to be very robust and rattle-free.
These seat swivels only fit vans with single front seats. Kit includes:
- Swivel plate and bolts to fit standard seat boxes.
- The swivel plate fits between your original seat base and the original seat slider rails.
- European TUV safety approval.
- Seat height increases by approx 43mm.
- Automatically locks in place facing forward for driving.
- Pivot point is centrally located in the base.
Note: For seats fitted with up/down height adjustment (that is most of them) you will find that you may need to pump up the seat height to allow the seat to rotate easily.
We no longer include paper copies of our fitting guides so please: View our fitting Guide for T5 swivel
Additional information from a client:
Crafters seem to be available with two heights of handrake handle. If yours is higher than the seat base then you will need to add a spacer under the swivel so it can clear the handbrake on its way around. Also if you do not have height adjustable seats you'll have to remove some of the plastic seat base trim.
The swivel can be made to work with a twin passenger seat. The trick is: remove the extra spacers on the central seats seat belt receiver so it sits as close as possible to the seat base box, then when you want to spin the drivers seat you just need to slide the passengers seat cushion forwards - again this frees up a little bit of extra room to play with.