Vinyl Adhesive is ideal for bonding Vinyl Adhesive or PVC floor coverings to a variety of substrates including concrete, wood, stone and most other hard surfaces.
Vinyl Adhesive is an acrylic based adhesive formulated to be completely free from materials which would contribute towards plasticiser migration.The Easi-Flo valve and Easi-Control actuator system gives greater fingertip control; For larger areas, press actuator full on and move can away slightly. For narrower band widths or to apply less adhesive, press the actuator more gently and move can closer.
How to use: It is always best to coat both surfaces. Spray onto a clean, dry and dirt free surface from approximately 10” (25cm). Spray two coats if surface is dusty. Apply floor covering to substrate whilst the adhesive is still tacky, press floor covering into place starting at the centre and working outwards.
Whilst handling Vinyl Adhesive, we advise to avoid spillage, to keep away from heat, sparks and open flames and to use the adhesive in well ventilated areas. Vinyl Adhesive needs to be stored at moderate temperatures in dry, well ventilated areas and must not be exposed to direct sunlight or temperatures above 50 °C.
- Quick and convenient
- No mess
- No plasticiser migration issues
- Easi-Flo valve and Easi-Control actuator system